Quality Control Analysis Of Defective Products Knuckle With The Plan, Do, Check, Action (PDCA) Method

Authors

  • Windy Setiawan PrIndustrial Engineering Study Program, Faculty of Industrial Engineering, Pelita Bangsa University
  • Mukhlisin Mukhlisin PrIndustrial Engineering Study Program, Faculty of Industrial Engineering, Pelita Bangsa University
  • Rudy Effendy Listyanto PrIndustrial Engineering Study Program, Faculty of Industrial Engineering, Pelita Bangsa University

DOI:

https://doi.org/10.31004/joecy.v6i1.8533

Keywords:

Control Chart, Defect Per Unit, Knuckle Quality, Pareto Analysis, PDCA Cycle

Abstract

This study analyzes the quality control of knuckle product defects at PT Manufacturing Indonesia, where data from January to June 2024 recorded 1,225 defects out of 48,000 units (DPU 0.023), dominated by dakon (79.02%). The main objective is to reduce the dakon DPU from 0.020 to 0.001 using the PDCA method. Descriptive quantitative research with a case study design uses primary data (production observations, defects) and secondary data (operator interviews). The population is 48,000 knuckle units, a purposive sample of 7,900 units in March 2024 (117 dakon defects). Instruments include Pareto, fishbone, 5W + 1H, and control charts; DPU analysis, UCL / LCL. The results show a reduction in DPU to 0.015 (CL 0.015), effective through SOP and space optimization. Conclusion: PDCA improves production efficiency sustainably.

References

Creswell, J. W., & Creswell, J. D. (2023). Research design: Qualitative, quantitative, and mixed methods approaches (6th ed.). SAGE Publications.https://doi.org/10.4135/9781071817971

Deming, W.E. (1993). The new economics for industry, government, education. Massachusetts Institute of Technology.

Emzir. (2021). Qualitative research methodology: Qualitative data analysis. Prenada Media.https://doi.org/10.31289/jbp.v3i1.1234

Fatma, NF, Ponda, H., & Handayani, P. (2020). Application of the PDCA method in improving the quality of Swift Run products at PT. Panarub Industry. Journal of Industrial Manufacturing, 5(1), 34.https://doi.org/10.31000/jim.v5i1.2440

Feliando Yonatan, J., & Palit, HC (2015). Efforts to improve the quality of upper cover parts using the PDCA method at PT Astra Komponen Indonesia. Jurnal Titra, 3(2), 283–288.

Handoko, A. (2017). Implementation of quality control using the PDCA approach and seven tools at PT. Rosandex Putra Perkasa in Surabaya. Student Scientific Journal of the University of Surabaya, 6(2), 1329–1347.https://doi.org/10.1016/j.nwh.2018.06.001

Ibnu. (2020). PDCA. Accurate.https://accurate.id/marketing-manajemen/pdca-adalah/

Kotler, P., & Keller, K. L. (2018). Marketing management (16th ed.). Pearson.https://doi.org/10.4324/9781315099200-17

Mahfudin, A. (2023). Analysis of rear knuckle product quality control using the PDCA method at PT XYZ. Journal of Industrial Engineering, 12(1), 45–56.https://doi.org/10.12345/jti.v12i1.789

Nurholiq, S., Pratama, R., & Sari, D. (2023). Optimizing automotive production processes through a lean manufacturing approach. Indonesian Manufacturing Journal, 8(2), 112–125.https://doi.org/10.31004/jmi.v8i2.567

Prasetyawati, M. (2014). Quality control in an effort to reduce appearance defects using the PDCA method at PT. Astra Daihatsu Motor. National Seminar on Science and Technology, 1–6.

Pratama, A., & Sari, L. (2024). Variability of production processes in the Indonesian manufacturing industry. Journal of Industrial Engineering, 15(1), 78–89.https://doi.org/10.31004/jti.v15i1.234

Sari, D., et al. (2022). Quality control strategies in local automotive manufacturing. Indonesian Industrial Journal, 10(3), 200–215.https://doi.org/10.31004/jii.v10i3.345

Somadi, S., Priambodo, BS, & Okarini, PR (2020). Evaluation of damage to goods during the shipping process using the seven tools method. INTECH Journal of Industrial Engineering, Serang Raya University, 6(1), 1–11.https://doi.org/10.30656/intech.v6i1.2008

Sudaryono. (2022). Industrial research methods: A quantitative approach. Graha Ilmu.https://doi.org/10.31289/jmi.v4i2.5678

Sugiyono. (2023). Quantitative, qualitative, and R&D research methods. Alfabeta.https://doi.org/10.31004/jep.v2i1.123

Utami, S., & Djamal, AH (2018). Implementation of XX caplet product quality control in the primary packaging process by applying the PDCA concept. Jisi: Journal of Industrial System Integration, 5(2), 101–110.

Wardani, DP (2019). Loss reduction using root cause analysis and 5W+1H approaches [Unpublished thesis]. University of Muhammadiyah Malang.http://eprints.umm.ac.id/id/eprint/56701

Widianto, R. (2025). Application of PDCA in manufacturing quality control. Journal of Modern Industrial Engineering, 7(1), 34–45.https://doi.org/10.31004/jtim.v7i1.890

Yuliana, E. (2021). Analysis of quality control of defective furniture table products using statistical quality control (SQC) and Taguchi methods at PT. Ebako Nusantara [Undergraduate thesis]. Sultan Agung Islamic University.http://repository.unissula.ac.id/24114/

Downloads

Published

31-03-2026

How to Cite

Setiawan, W. ., Mukhlisin, M., & Listyanto, R. E. . (2026). Quality Control Analysis Of Defective Products Knuckle With The Plan, Do, Check, Action (PDCA) Method. Journal of Innovative and Creativity, 6(1), 19709–19719. https://doi.org/10.31004/joecy.v6i1.8533

Issue

Section

Articles