Inovasi Konstruksi: Penerapan Mechanical Metamaterials untuk Struktur Ringan dan Adaptif
DOI:
https://doi.org/10.31004/joecy.v5i2.2462Keywords:
metamaterials, konstruksi, efisiensi energi, adaptabilitas, desain inovatif, kolaborasi interdisipliner, teknologi fabrikasiAbstract
Pemanfaatan mechanical metamaterials dalam konstruksi menawarkan potensi inovatif untuk menciptakan struktur yang ringan, adaptif, dan efisien. Metamaterials, yang dirancang untuk memiliki sifat fisik unik, dapat memanipulasi gelombang elektromagnetik, suara, dan mekanika, sehingga meningkatkan kinerja struktural dan efisiensi energi. Studi ini membahas berbagai aplikasi metamaterials dalam industri konstruksi, termasuk peningkatan isolasi termal dan akustik, pengurangan beban pada struktur, dan kemampuan adaptif terhadap kondisi lingkungan yang berubah. Contohnya, desain panel dinding dan jembatan menggunakan metamaterials menunjukkan penghematan material dan biaya, serta peningkatan daya tahan. Meskipun ada tantangan dalam biaya produksi dan regulasi, kolaborasi interdisipliner antara akademisi, insinyur, dan pembuat kebijakan sangat diperlukan untuk mengoptimalkan penerapan teknologi ini. Dengan pendekatan yang tepat, metamaterials dapat menjadi solusi yang signifikan untuk menghadapi tantangan keberlanjutan dan efisiensi dalam konstruksi modern.
References
Abdulrasool, A. T., Mohammed, S. S., Kadhim, N. R., & Hussain, W. A. M. (2022). Sustainable Materials Used as Lightweight Aggregate :(An Overview). IOP Conference Series: Earth and Environmental Science. https://doi.org/10.1088/1755-1315/961/1/012027
Alex-Amor, A. (2022). 3-D Metamaterials: Trends on Applied Designs, Computational Methods and Fabrication Techniques. Electronics. https://doi.org/10.3390/electronics11030410
Bertoldi, K., et al. (2017). Flexible mechanical metamaterials. Nature Reviews Materials, 2(5), 17079. https://doi.org/10.1038/natrevmats.2017.79
Boccaccio, M., Rachiglia, P., Malfense Fierro, G. P., Pucillo, G. P., & Meo, M. (2021). Deep-Subwavelength-Optimized Holey-Structured Metamaterial Lens for Nonlinear Air-Coupled Ultrasonic Imaging. Sensors. https://doi.org/10.3390/S21041170
Brûlé, S., Enoch, S., & Guenneau, S. (2020). Emergence of Seismic Metamaterials: Current State and Future Perspectives. Physics Letters A. https://doi.org/10.1016/J.PHYSLETA.2019.126034
Caleap, M., & Drinkwater, B. W. (2015). Metamaterials: supra-classical dynamic homogenization. New Journal of Physics. https://doi.org/10.1088/1367-2630/17/12/123022
Chen, T.-H. (2022). Engineered Metamaterials: a Novel Technology for Seismic Protection. Impact. https://doi.org/10.21820/23987073.2022.3.12
Ciaburro, G., Parente, R. M., Iannace, G., & Puyana-Romero, V. (2022). Design Optimization of Three-Layered Metamaterial Acoustic Absorbers Based on PVC Reused Membrane and Metal Washers. Sustainability. https://doi.org/10.3390/su14074218
Colombi, A., Zaccherini, R., Aguzzi, G., Palermo, A., & Chatzi, E. (2020). Mitigation of seismic waves: Metabarriers and metafoundations bench tested. Journal of Sound and Vibration. https://doi.org/10.1016/J.JSV.2020.115537
Craster, R. V., Guenneau, S., Muamer, K., & Wegener, M. (2023). Mechanical metamaterials. Reports on Progress in Physics. https://doi.org/10.1088/1361-6633/ace069
Cuomo, M. (2023). Design of architected materials composed by periodic surfaces. Materials Research Proceedings. https://doi.org/10.21741/9781644902431-87
Engheta, N. (2009, June 14). Metamaterials: A paradigm for tailoring light. European Quantum Electronics Conference. https://doi.org/10.1109/CLEOE-EQEC.2009.5191759
Fachinotti, V. D. (2023). Computational Design of Building Envelopes as Thermal Metamaterials. Rilem Bookseries. https://doi.org/10.1007/978-3-031-33211-1_106
Frenzel, T. & Muamer, K. (2017). 3D mechanical metamaterials with a twist. Science 358(6366):1072-1074. DOI:10.1126/science.aao4640
González-Albuixech, V. F., & Sanz-Gómez, M. Á. (2023). Simulation of damage phenomena in metamaterials. Revista Internacional De Metodos Numericos Para Calculo Y Diseno En Ingenieria. https://doi.org/10.23967/j.rimni.2023.04.003
Góra, P., & Łopato, P. (2023). Metamaterials’ Application in Sustainable Technologies and an Introduction to Their Influence on Energy Harvesting Devices. Applied Sciences. https://doi.org/10.3390/app13137742
Güngör, U., Kurt, A., Lale, M., Acar, F., Görgülüarslan, R. M., & Ünver, H. Ö. (2022, October 30). Design and Numerical Analysis of Locally-Resonant Meta-Lattice Structure for Vibration Attenuation. https://doi.org/10.1115/imece2022-95206
Hall, A., Dodd, G., & Calius, E. P. (2020). Multiplying resonances for attenuation in mechanical metamaterials: Part 1 – Concepts, initial validation and single layer structures. Applied Acoustics. https://doi.org/10.1016/J.APACOUST.2020.107513
Huang, J., Fu, M.-H., & Zheng, B.-B. (2022). A novel series of mechanical metamaterials with sign-changing coefficient of thermal expansion and their parameter analysis. Composite Structures. https://doi.org/10.1016/j.compstruct.2022.116082
Huang, Q., Wang, G., Zhou, M., Zheng, J., Tang, S., & Ji, G. (2022). Metamaterial electromagnetic wave absorbers and devices: Design and 3D microarchitecture. Journal of Materials Science & Technology. https://doi.org/10.1016/J.JMST.2021.07.055
Jiao, P. (2023). Mechanical Energy Metamaterials in Interstellar Travel. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2023.101132
Kar, S., & Jha, K. N. (2023). Examining the Effect of Material Management Practices on Material Availability and Waste Reduction in Construction Projects. Journal of the Construction Division and Management. https://doi.org/10.1061/jcemd4.coeng-13589
Kubo, W. (2022, October 3). Superiority of metamaterial as an absorber and a heat generator. https://doi.org/10.1117/12.2632979
Kumar, P., Ali, T., & Pai, M. M. M. (2021). Electromagnetic Metamaterials: A New Paradigm of Antenna Design. IEEE Access. https://doi.org/10.1109/ACCESS.2021.3053100
Liu, R., Ji, C., Zhao, Z., & Zhou, T. (2015). Metamaterials: Reshape and Rethink. Engineering. https://doi.org/10.15302/J-ENG-2015036
Liu, Y., Zhang, X., & Zhang, X. (2011). Metamaterials: a new frontier of science and technology. Chemical Society Reviews. https://doi.org/10.1039/C0CS00184H
Menéndez, E., Salem, Y., Hernández Montes, E., Alonso, M. C., & Gil, L. M. (2020). Behaviour and Characteristics of Construction Materials Subjected to Different Environmental Conditions. https://doi.org/10.1007/978-3-030-76547-7_14
Mohsenizadeh, M., Gasbarri, F., Munther, M., Beheshti, A., & Davami, K. (2018). Additively-manufactured lightweight Metamaterials for energy absorption. Materials & Design. https://doi.org/10.1016/J.MATDES.2017.11.037
Patel, S., & Raval, F. (2013, November 1). Simulation study of the different Metamaterial structures. Nirma University International Conference on Engineering. https://doi.org/10.1109/NUICONE.2013.6780130
Safari, M., Kherani, N. P., & Eleftheriades, G. V. (2021). Multi-Functional Metasurface: Visibly and RF Transparent, NIR Control and Low Thermal Emissivity. Advanced Optical Materials. https://doi.org/10.1002/ADOM.202100176
Sedighi, H. M., Lallart, M., & Zhuang, X. (2022). Metamaterials: Design, modelling, simulation and implementation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207221137433
Shafigh, P., Che Muda, Z., Beddu, S., Zakaria, A., & Almkahal, Z. (2022). Thermo-mechanical efficiency of fibre-reinforced structural lightweight aggregate concrete. Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2022.105111
Sinha, P., & Mukhopadhyay, T. (2023). Programmable multi-physical mechanics of mechanical metamaterials. Materials Science and Engineering R. https://doi.org/10.1016/j.mser.2023.100745
Soliman, A. E., Hafeez, G., Erkmen, E., Ganesan, V., Ouf, M. A., Hammad, A., Eicker, U., & Moselhi, O. (2022). Innovative construction material technologies for sustainable and resilient civil infrastructure. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.01.248
Su, R., Zhang, X., Wang, W., Li, Y., He, R., & Fang, D. (2023). 3D-Printed Micro/Nano-Scaled Mechanical Metamaterials: Fundamentals, Technologies, Progress, Applications, and Challenges. Small. https://doi.org/10.1002/smll.202206391
Tian, Z., Bennett, J., Yang, J., Lawrie, T., Elmadih, W., Bardalai, A., Gerada, C., Zhu, J., & Chronopoulos, D. (2022). Experimental investigation of mechanical, acoustic and hybrid metamaterial designs for enhanced and multi-band electric motor noise dissipation. Engineering Structures. https://doi.org/10.1016/j.engstruct.2022.114945
Tian, Z., Bennett, J., Yang, J., Lawrie, T., Elmadih, W., Bardalai, A., Gerada, C., Zhu, J., & Chronopoulos, D. (2022). Experimental investigation of mechanical, acoustic and hybrid metamaterial designs for enhanced and multi-band electric motor noise dissipation. Engineering Structures. https://doi.org/10.1016/j.engstruct.2022.114945
Tong, S. (2022). Metamaterial Lens for Nondestructive Evaluation of Composites. https://doi.org/10.1007/978-981-16-6441-0_29
Tong, X. C. (2018). Mechanical Metamaterials and Metadevices. https://doi.org/10.1007/978-3-319-66044-8_11
Triono, B., & D. Darmawan. 2024. 3D Printing Technology as a Driver of Innovation and Efficiency in Mechanical Engineering. Journal of Science, Technology and Society, 5(2), 11-20.
Varma, T. V., Ungureanu, B., Sarkar, S., Craster, R. V., Guenneau, S., & Brûlé, S. (2021). The Influence of Clamping, Structure Geometry, and Material on Seismic Metamaterial Performance. Frontiers in Materials. https://doi.org/10.3389/FMATS.2021.603820
Walser, R. M. (2003). Metamaterials: An Introduction. https://doi.org/10.1117/3.504610.CH13
Wu, L., & Thiard, P. (2022). Experimental investigation of thermal architected metamaterials for regulating transient heat transfer. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2022.122960
Xu, L., & Huang, J. (2019). Metamaterials for Manipulating Thermal Radiation: Transparency, Cloak, and Expander. Physical Review Applied. https://doi.org/10.1103/PHYSREVAPPLIED.12.044048
Yang, W., Seong, Y., Jeong, S., & Park, J. (2018). Vibration reduction using meta-structures composed of tuned dynamic absorbers employing mass impacts. Composite Structures. https://doi.org/10.1016/J.COMPSTRUCT.2017.02.083
Yu, X., Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2017). Mechanical metamaterials associated with stiffness, rigidity and compressibility: a brief review. Progress in Materials Science. https://doi.org/10.1016/J.PMATSCI.2017.12.003
Zhao, W., Yue, C., Liu, L., Leng, J., & Liu, Y. (2022). Mechanical behavior analyses of 4D printed metamaterials structures with excellent energy absorption ability. Composite Structures. https://doi.org/10.1016/j.compstruct.2022.116360
Zheng, X., Zhang, X., Chen, T.-T., & Watanabe, I. (2023). Deep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design. Advanced Materials. https://doi.org/10.1002/adma.202302530.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Bambang Triono, Didit Darmawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
