Rancang Bangun Tirai Otomatis Berbasis Arduino Uno R3 Dengan Sensor Ldr Dan Kendali Manual Via Bluetooth Hc-05 Melalui Aplikasi Mit App Inventor
DOI:
https://doi.org/10.31004/joecy.v5i2.2304Keywords:
Automatic Curtains, Mit Inventor App, LDR Sensor, Bluetooth HC-05, Smartphone, Arduino Uno R3Abstract
The use of Automatic Curtains facilitates daily activities at school, in the library, and at home. This study designs a prototype of automatic curtains operated with a Light Dependent Resistor (LDR) sensor and a Bluetooth HC-05 module connected to a smartphone via the Mit App Inventori application. The method used in the automatic curtain research uses the LDR Sensor as an output to open and close the curtains automatically and uses Bluetooth HC-05 which is designed to be connected to a smartphone to open and close the curtains manually. Testing was carried out for experiments that the designed prototype functions according to the commands on the Arduino Uno R3 on the light captured by the LDR Sensor> 250 Lux then the curtain will be closed, and if the light captured by the dark LDR Sensor is <10 Lux then the curtain will open. This test aims to facilitate the learning and teaching process indoors by preventing the hot sun from entering the room and the curtain material used can be used as a Projector
References
F. Firdaus, M. Basyir, dan A. Finawan, “Rancang Bangun Prototype Sistem Kendali Keamanan pada Jendela Pintar Berbasis Internet of Thing,” J. Litek J. List. Telekomun. Elektron., vol. 18, no. 2, hal. 78, 2021, doi: 10.30811/litek.v18i2.2305.
G. Gurning et al., “Sistem Pengendalian Tirai Dan Jendela Otomatis Pada Sebuah Gedung Using Fuzzy Logic Method Automatic Curtain And Window Control System In A Building,” vol. 9, no. 5, hal. 2521–2532, 2022.
N. Sepiyandi dan A. R. Machdi, “Pengendalian Lampu Menggunakan Module Bluetooth HC-05 Di Laboratorium Teknik Elektro,” JET J. Elektro Tek., vol. 1, no. 2, hal. 10–16, 2021, [Daring]. Tersedia pada: https://journal.unpak.ac.id/index.php/JET/article/view/6177
Y. Afdianza dan A. H. Rambe, “Perancangan Deteksi Banjir Dan Peringatan Dini Via Sms Dan Telepon Berbasis Arduino,” J. MeSTeRI, vol. 1, hal. 9–16, 2022.
D. Haryanto dan S. Mulyani, “Menutup Dan Membuka Gorden Otomatis dengan Pengaturan Waktu dan Pengaktifan Bluetooth Berbasis Arduino,” Manaj. Inform., vol. 9, no. 2, hal. 1–10, 2022.
S. M. Sidik dan H. Hermawaty, “Prototype Jemuran Pakaian Otomatis Menggunakan Arduino Berbasis Android,” J. …, vol. 01, no. 02, hal. 51–58, 2019, [Daring].
P. Studi et al., “2020 Himawan Dkk Rumah Pintar”.
A. MA’ARIF, R. ISTIARNO, dan S. SUNARDI, “Kontrol Proporsional Integral Derivatif (PID) pada Kecepatan Sudut Motor DC dengan Pemodelan Identifikasi Sistem dan Tuning,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 9, no. 2, hal. 374, 2021, doi: 10.26760/elkomika.v9i2.374.https://jurnal. stmik-amikbandung.ac.id/joint/article/download/13/10
M. N. kaliky Hj. A. Irmayani p , Asrul, “Desain Bangun Ayakan Alat Mesin Tanaman Perkebunan,” J. Telekomun. Kendali dan List., vol. 2, no. 1, hal. 12–22, 2020.
A. B. Rehiara dan Y. Rumengan, “Arduino-based PLTS and PLN Hybrid Controller Design,” Procedia Eng. Life Sci., vol. 1, no. 1, 2021, doi: 10.21070/pels.v1i1.806.
H. Kurnia AR, “Pemanfaatan Sensor Ldr Pada Robot Light Follower Dengan Konsep Holonomic Sebagai Media Pembelajaran,” JATI (Jurnal Mhs. Tek. Inform., vol. 7, no. 1, hal. 95–100, 2023, doi: 10.36040/jati.v7i1.6061.
Y. M. Rizki et al., “Elastohydrodynamic Multistep Journal Bearing Menggunakan Metode Computational Fluid Dynamics Dan Fluid-Structure Interaction,” vol. 9, no. 2, hal. 215–220, 2021.
I. R. Muttaqin dan D. B. Santoso, “Prototype Pagar Otomatis Berbasis Arduino Uno Dengan Sensor Ultrasonic Hc-SR04,” JE-Unisla, vol. 6, no. 2, hal. 41, 2021, doi: 10.30736/je-unisla.v6i2.695.
E. Fuad Ibrahim, J. Maulindar, dan A. P. Ichsan, “Rancang Bangun Tirai Gorden Otomatis Berbasis Internet of Things,” Innov. J. Soc. Sci. Res., vol. 3, hal. 1051–1060, 2023.
M. Sunarhati, “Analisa Pengaturan Kecepatan Putaran Motor Dc Penguat Dengan Menggunakan Thyristor,” hal. 24–34, 2018.
A. Nurhuda, M. I. Ukkas, dan M. Raslan, “Kendali Tirai Otomatis Mengunakan Sensor Ldr (Light Dependent Resistor) Dan Perintah Suara Berbasis Arduino Uno,” Perpustakaan.Wicida.Ac.Id, [Daring]. Tersedia pada: https://perpustakaan.wicida.ac.id/uploaded_files/temporary/DigitalCollection/ZWQ2N2Y2MjQzZmQ4N2ZkZTAzMGNkZDc5MjQzZDk1OWRhZjI5MmRjYw==.pdf
S. I. Putri dan S. Sudarti, “Analisis Intensitas Cahaya di Dalam Ruangan dengan Menggunakan Aplikasi Smart Luxmeter Berbasis Android,” J. Mater. dan Pembelajaran
L. Budiman dan H. C. Indrani, “Desain Pencahayaan Pada Ruang Kelas Sma Negri 9 Surabaya,” Dimens. Inter., vol. 10, no. 1, hal. 33–41, 2012, doi: 10.9744/interior.10.1.33-41.., vol. 12, no. 2, hal. 51, 2022, doi: 10.20961/jmpf.v12i2.51474.
J. I. Havif dan B. Anto, “Evaluasi Kualitas Pencahayaan pada Ruang Perkuliahan Gedung C Fakultas Teknik Universitas Riau,” Jom FTEKNIK, vol. 4, no. 2, hal. 1–5, 2017.
I. Sugistoro, R. Firnanda, M. S. Huda, dan A. H. Kisyarangga, “Rancang Bangun Lux Meter Berbasis Sensor TSL2561,” J. Renew. Energy, Electron. Control, vol. xx, no. 02, hal. 46–51, 2023, doi: 10.31284/j.JREEC.2023.V31i.5259.dan suhu udara, terhadap curah hujan di Kota Surabaya (Doctoral dissertation, Universitas Islam Negeri Maulana Malik Ibrahim).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Erik Agustian Yulanda, Sindi Kornelia Karolin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
