Analisis Pengendalian Kualitas Beras menggunakan Pendekatan Seven Tools dan 5w+1h (Studi Kasus: PB. Langgeng Jaya)
DOI:
https://doi.org/10.31004/joecy.v6i3.14606Keywords:
Quality Control, Seven Tools, P-Chart, Fishbone Diagram, 5W 1H, Broken Rice.Abstract
PB. Langgeng Jaya is a rice processing company currently facing quality issues regarding crushed rice and broken rice fragments (menir). This study aims to analyze quality control conditions, identify the causes of defects, and formulate improvement proposals for the rice milling process. The research employs the "Seven Tools" approach and the 5W+1H method. Data on crushed rice and broken fragments were collected separately but categorized together as "broken rice" for the quality control analysis. Results from 12 observation periods (February 9-Mey 27, 2026) showed a total production of 984,360 kg with 66,431 kg (6.75%) of defects; this total comprised 46,229 kg (4.70%) of crushed rice and 20,202 kg (2.05%) of broken fragments. P-Chart analysis yielded a Central Line (CL) of 0.06749, an Upper Control Limit (UCL) of 0.07011, and a Lower Control Limit (LCL) of 0.06484; with 8 out of 12 observation points falling outside the control limits, the milling process is not yet fully under statistical control. A Fishbone Diagram analysis identified contributing factors across the Man, Method, Machine, and Material aspects, including improper machine settings, incomplete pre-operation checks, RPM instability, rubber roller wear, unsuitable paddy moisture content, and inconsistent raw material conditions. Improvement proposals formulated using the 5W+1H method include adjusting machine parameters according to Standard Operating Procedures (SOP), conducting pre-operation checks, controlling RPM, using moisture testers, implementing preventive maintenance, inspecting rubber roller conditions, and enhancing raw material inspection and sorting. These proposals serve as the basis for improvements aimed at increasing milling process consistency and reducing the occurrence of broken rice defects.
References
Badan Standarisasi Nasional. (2011). SNI 4511:2011 Mesin penggiling padi sekali umpan tipe rol karet – Syarat mutu dan metode uji.
Badan Standarisasi Nasional. (2020). SNI 6128:2020 Beras.
Badan Standarisasi Nasional. (2023). SNI 224:2023 Gabah.
Kamarujaman, R., Priambadi, I. G. N., Setiawati, N. L. P. L., Adyana, I. W. B., Suriadi, K., & Dewi, S. (2025). Pengendalian Kualitas Produk Beras Menggunakan Metode Seven Tools Di Perumda Dharma Shantika Tabanan Quality Control of Rice Products Using The Seven Tools Method At Perumda Dharma Shantika Tabanan. Jurnal Riset Dan Aplikasi Teknik Industri, 03(06). https://doi.org/10.24843/JRATI.2025.v03.i01.p066
Montgomery, D. C. (2020). Introduction to Statistical Quality Control (8th ed.). John Wiley & Sons.
Nursyahbani, Z., Sari, T. E., & Winarno, W. (2023). Usulan Penurunan Kecacatan Piston Cup Forging Menggunakan Fishbone Diagram, FMEA dan 5W+1H di Perusahaan Spare-part Kendaraan. Go-Integratif: Jurnal Teknik Sistem Dan Industri, 4(01), 22–32. https://doi.org/10.35261/gijtsi.v4i01.8703
Rochmatullah, P. D., Pramono, S. N. W., & Ulhaq, M. M. (2022). Perancangan Langkah Pengendalian Kualitas Produksi Dalam Upaya Mengurangi Jumlah Defect Dengan Menggunakan Metode FMEA Dan New Seven Tools Pada Produk Bottom PT Inti Sukses Garmindo.
Rozi, F., & Andesta, G. (2025). Analysis of Quality Control in Domestic and Export Fertilizer Products Using Seven Tools and Failure Mode and Effect Analysis (FMEA) at PT. XYZ. Journal of Information Technology and Computer Science (INTECOMS), 8(6).
Sugiyono. (2019). Metode penelitian kuantitatif, kualitatif, dan R&D. Bandung: Alfabeta.
Suhartini, Basjir, M., & Hariyono, A. T. (2020). Pengendalian Kualitas dengan Pendekatan Six Sigma dan New Seventools sebagai Upaya Perbaikan Produk. Journal of Research and Technology, VI, 297–311.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Iyan Bastian, Verani Hartati

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.







